We compare, explain and calculate, without selling anything ourselves.

Buyer's Advice & Tools
Battery Capacity

20kWh Home Battery Storage: Cost, Limits and Who It Suits

20kWh is as far as a single modular unit usually goes. What that ceiling means, what it costs, and why the next step up is about paperwork rather than batteries.

  • Around 18 kWh usable
  • Single-unit ceiling
  • Independent advice
2 kWh This size: 20 kWh 60 kWh
Single-unit ceiling Around 18 kWh usable A heat pump day plus an EV top-up
Best for Large household with heat pump and EV
Annual use Up to about 9,000 kWh
Solar array About 12,000 W (24-30 panels)
Indicative price From about £3,800

Jump to another capacity

A 20kWh home battery is usually the most a single modular unit will hold, which makes it a meaningful landmark rather than just another rung. Expect around £3,800 to £4,700 for the hardware. It stays inside the simple grid connection process, it needs no second unit, and it is the last size on the ladder where everything remains straightforward.

18 kWh

Usable capacity

1 unit

No second system needed

~6 hrs

To charge from empty at 3 kW

Why 20kWh is a landmark, not just a bigger number

Modular home batteries are built as a base unit holding the electronics, plus expansion modules that add storage. Depending on the brand, a single unit tends to top out somewhere around 20kWh once it carries its full complement of modules. Go beyond that and you are not adding another module; you are adding a second complete system running alongside the first.

That matters more than it sounds, because two units running together roughly double the combined output. A single unit on a dedicated circuit sits at two or three kilowatts, comfortably under the 3.68 kW single-phase threshold your network operator cares about. Two units cross it. The battery is the same hardware; what changes is that the installation now needs approval before it goes in rather than a notification afterwards.

At 20kWh and below

One base unit with its modules. A qualified electrician runs a dedicated circuit, connects the system and notifies your network operator once it is done. No waiting, no application, no approval to chase. This is the simple route and it covers the great majority of British homes.

Above 20kWh

A second complete unit in parallel, which roughly doubles output and pushes the installation over the single-phase threshold. Your network operator now has to approve it before installation. Expect an application, a wait, and in some cases conditions attached to the connection.

None of that makes larger systems a bad idea. It does mean 20kWh is the point to stop and ask whether you genuinely need more, because the step after it costs more than the price list suggests.

Our take

If you are weighing 20kWh against something larger, price the whole job, not the battery. The second unit brings an application, a wait and possibly conditions on your connection. Plenty of households that thought they wanted 25kWh settle happily at 20 once they see the difference in process.

How much battery storage do you actually need?

Three figures decide almost everything: how much electricity your household uses in a year, how much surplus solar power you send back to the grid, and how much of that you actually use after sunset.

1

Annual consumption

Divide it by 365 to get your average day. At 9,000 kWh a year that is roughly 25 kWh per day, though a household at this level usually has that concentrated in heating and car charging rather than spread evenly.

2

Exported solar energy

This is the surplus a battery could have stored. At 20kWh you need a substantial array to fill the stack from the roof alone, so check this figure carefully rather than assuming.

3

Evening and overnight demand

Work out what you actually draw between the evening peak and the following morning. If that figure is well under 18 kWh, the extra capacity will not cycle.

Our guide to battery capacity works through the method in full, or run your figures through the configurator below.

What does 20kWh of battery storage cover in a real home?

Most lithium iron phosphate batteries release 90 to 95% of their nominal capacity, so a 20kWh battery gives you roughly 18 kWh in daily use. That is enough to change what the battery is for: below this level it covers an evening, here it covers a day.

ScenarioTypical daily useShare of 18 kWh usable
Household base load, 24 hours3-5 kWhAbout 22%
Cooking, laundry and dishwashing3-4 kWhAbout 19%
Heat pump, cold winter day8-10 kWhAbout 50%
EV top-up, 40 miles of range10-12 kWhAbout 61%
All of the above together24-31 kWhExceeds capacity
Indicative figures. Real consumption depends on the property, the appliances and the weather.

Read the last row carefully, because it is the honest answer to the most common reason people reach this size. A household running a heat pump and charging a car at home uses more in a winter day than 18 kWh holds. 20kWh covers one of those two comfortably and both only partially. If you want to cover both, you are looking at a second unit, and the 25kWh guide explains what that involves.

Can you actually fill 20kWh?

This is where more 20kWh purchases go wrong than anywhere else. Charge rate does not rise with capacity: modular systems commonly take around 3 kW whether the stack holds 10kWh or 20kWh. Filling 18 kWh from empty therefore takes roughly six hours.

From a cheap tariff

Six hours is longer than most off-peak windows. On a shorter tariff you will routinely start the evening with a part-filled battery, and the unfilled portion earns nothing.

From the roof

You need an array of roughly 12,000 W, around twenty-four to thirty panels, to fill this regularly. That is a large roof, and in winter it will not manage it on any day.

Both together

The combination is what makes 20kWh work: solar through the day, a cheap window overnight for whatever the sun did not supply.

The practical test is simple. If you cannot describe how the battery gets filled on an ordinary Tuesday in November, you are buying capacity that will spend the winter half empty.

How much does a 20kWh battery cost?

Around £3,800 to £4,700 for the hardware, plus £250 to £500 for an electrician to run a dedicated circuit. This is the best cost per kilowatt-hour on the simple side of the ladder: you are spreading one base unit’s electronics and one circuit across the maximum storage a single system holds.

CapacityHardwareDedicated circuitGrid connection
5 kWh£1,100 – £1,400£250 – £500Connect and notify
10 kWh£2,000 – £2,500£250 – £500Connect and notify
15 kWh£2,900 – £3,600£250 – £500Connect and notify
20 kWh (this page)£3,800 – £4,700£250 – £500Connect and notify
25 kWh£4,700 – £5,800£250 – £500Prior approval
30 kWh£5,500 – £6,900£250 – £500Prior approval
Indicative figures for a modular system. A conventional installation built around a hybrid inverter is a different product and costs several thousand pounds more for the same storage.

Payback still depends far more on your electricity contract than on the purchase price, and at this size the contract is doing most of the work. A household on a time-of-use tariff shifting 18 kWh a day from cheap hours to peak hours is moving real money; the same battery on a flat tariff is an expensive way to store sunshine.

Is a 20kWh home battery right for you?

Pros

  • Your annual electricity use is between about 7,000 and 9,000 kWh
  • You run a heat pump and want it covered on the coldest days
  • You have roughly 24 to 30 solar panels, or a long off-peak window, or both
  • You want the largest system that still avoids prior grid approval
  • You want the best cost per kilowatt-hour on the simple side of the ladder
  • You are planning for consumption that is about to rise

Cons

  • You cannot describe how the battery fills on a dull November day
  • Your off-peak window is under four hours and you have little solar
  • You have no electric heating and no EV charging at home
  • Your evening and overnight use is well under 18 kWh
  • You want whole-house backup, which is a different specification
  • A 15kWh system is already reaching morning with charge left

Is 20kWh enough for backup power?

Comfortably, in energy terms. 18 kWh runs essential loads for the best part of four days. As always the constraint is output rather than capacity: a backup socket rated at around 3 kW cannot run an oven and an induction hob at once however full the battery is.

Home battery supplying essential appliances during a power outage
Connected loadPowerRuntime on 18 kWh
Fridge, lights, router, phone charging150-250 WAround 3-4 days
The above plus TV and a laptop350-450 W40-51 hours
Add a small heater or kettle in bursts1,000-1,500 W12-18 hours
Electric oven or induction hob2,000-3,000 W6-9 hours, at the output limit

If uninterrupted whole-house power is the main reason you are buying, capacity is the wrong thing to shop for. That capability comes from a conventional installation with a hybrid inverter, and it is worth getting quotes for both approaches before you decide.

Discover smarter home energy with HomeBattery.com

A short introduction to how home batteries store solar energy, respond to electricity prices and fit into an ordinary household.

What to check before you buy a 20kWh battery

SpecificationWhy it mattersTypical at 20 kWh
Usable capacityWhat you actually get out of the battery each cycle17-19 kWh
Single-unit maximumWhether this fits in one system or needs a secondOften around 20 kWh, varies by brand
Continuous discharge powerWhether it can carry heating and cooking togetherTypically 2-3 kW on a dedicated circuit
Charge powerWhether you can refill inside your cheap tariff windowUp to about 3 kW, so roughly six hours from empty
Backup outputWhat you can run during a power cut, separate from the aboveUp to about 3 kW with modules fitted
Cycle life and warrantyThe real measure of lifespan, more than the number of years10 years or 6,000-8,000 cycles
Footprint and weightA full stack is heavy and needs a sound floor and clearanceSeveral modules, tens of kilograms each
Protection ratingRequired for outdoor placementIP65 for outdoor use

Footprint is worth real attention at this size. A full stack is a substantial piece of equipment, and the place you had in mind may not take it. Our capacity guide covers the connection rules and what your network operator needs.

20kWh or 25kWh?

On paper this is a 25% increase in storage for a similar increase in price. In practice it is the biggest step on the whole ladder, because it is where one unit becomes two.

20 kWh25 kWh
Usable capacityAbout 18 kWhAbout 22.5 kWh
Hardware£3,800 – £4,700£4,700 – £5,800
Number of unitsOneTwo
Combined outputTypically 2-3 kWRoughly double
Grid connectionConnect and notifyPrior approval needed
Floor spaceOne stackTwo stacks

The higher output is a genuine benefit, not just a regulatory inconvenience: two units can carry heating, cooking and car charging at the same time in a way one cannot. But if your reason for going larger is purely storage rather than power, stop at 20kWh. You get the simple connection, one footprint, and the best value per kilowatt-hour available without an application.

Frequently asked questions

Is 20kWh the largest single battery you can get?

For most modular platforms, yes or close to it. A single base unit with its full complement of expansion modules tends to reach somewhere around 20kWh, varying by brand. Larger systems are built by running two or three complete units in parallel.

How long does a 20kWh home battery last?

Discharging at its full rate on a dedicated circuit it empties in six to nine hours. Running only essential loads it lasts several days. As a rule, 18 kWh usable divided by the connected load in kilowatts gives the runtime in hours.

How much does a 20kWh battery cost?

Around £3,800 to £4,700 for the hardware, plus £250 to £500 for an electrician to run a dedicated circuit. That works out as the best cost per kilowatt-hour available without stepping up to a second unit.

Can I fill a 20kWh battery overnight?

Not usually in one go. At a charge rate of around 3 kW the stack takes roughly six hours to fill from empty, which is longer than most off-peak windows. In practice a 20kWh system relies on solar through the day as well as cheap hours overnight.

Do I need approval from my network operator for 20kWh?

Not in advance. A single unit on a dedicated circuit stays under the 3.68 kW single-phase threshold, so your installer connects it and notifies afterwards. That changes at the next size up, where a second unit pushes the combined output over the threshold.

How many solar panels do you need for a 20kWh battery?

Roughly twenty-four to thirty panels, or about 12,000 W, to fill it from the roof regularly. Most British homes do not have that, which is why 20kWh systems usually depend on a time-of-use tariff as well as solar.

Is 20kWh enough for a heat pump and an electric car?

For one of them comfortably, for both only partially. A heat pump on a cold day plus a meaningful car charge exceeds 18 kWh of usable storage. If you need both covered, you are looking at two units and the grid approval that comes with them.

How much space does a 20kWh battery take up?

More than people expect. A full stack is several modules weighing tens of kilograms each, and it needs a sound floor, clearance for airflow and, if it goes outside, a suitable protection rating. Check the dimensions against the spot you have in mind before ordering.

In summary

20kWh is usually as far as a single modular unit goes, which makes it the last straightforward size on the ladder
Around 18 kWh is usable, enough for a heat pump day or an EV top-up, but not both
It stays under the single-phase threshold, so your installer connects and notifies rather than waiting for approval
Expect roughly £3,800 to £4,700 for the hardware plus £250 to £500 for the circuit
Filling it takes about six hours at 3 kW, so you need solar, a long off-peak window, or both
The step to 25kWh means a second unit, higher output and prior grid approval