BLUETTI Elite 300
A compact 3,014.4 Wh LiFePO4 power station with 2,400 W of output, 6,000+ cycles, 1,200 W of solar input, a 10 ms UPS switchover and a 5-year warranty.
- Best for vans and home backup
- Power station
- 3,014.4 Wh
- 2,400 W
- Made by BLUETTI.
- Capacity: 3,014.4 Wh (314 Ah) with LiFePO4 cells rated for 6,000+ cycles to 80% capacity.
- Output: 2,400 W continuous through 2 AC outlets, plus 12 V/30 A, USB-C 100 W and 140 W and USB-A ports.
- Charges from the mains at up to 2,300 W in Turbo mode and takes up to 1,200 W of solar through the XT60 input.
- Weighs 26.3 kg. UPS switchover in 10 ms. BLUETTI's warranty is 5 years.
Not tested by us
We have not tested the BLUETTI Elite 300. The figures on this page come from the sources listed at the end of the page, checked on 13 November 2026, and we do not show prices. "Best for" is based on what the maker says the product is designed for, not on our own tests.
Key figures
3,014.4 Wh
Capacity
2,400 W
Continuous AC output
1,200 W
Solar input
Specifications
Last checked on 13 November 2026. The grey text under each name explains what the value means. To see it next to other products, compare it in our comparison tool.
| Specification | Value |
|---|---|
| Storage | |
| CapacityHow much energy the battery stores. Bigger means longer runtime or more of your own solar power used later. | 3,014.4 Wh (314 Ah) |
| Battery chemistryLFP (lithium iron phosphate) cells are known for long life and stable behaviour with heat. | Lithium iron phosphate (LiFePO4) |
| Cycle lifeHow many full charge and discharge cycles the cells are rated for before they hold less than the stated share of their original capacity. | 6,000+ cycles to 80% capacity |
| ExpansionExtra battery units that add storage to the same system. | Not stated |
| Output | |
| AC output (continuous)The power it can deliver all the time. Add up the watts of what you want to run at once and stay below this. | 2,400 W maximum, 230 V, 50/60 Hz, 2 AC outlets, pure sine wave. In bypass mode (mains passing through) up to 2,300 W |
| AC output (surge)A short burst above the continuous rating, for appliances that draw more power when they start. | 4,800 W listed as Surge Power on BLUETTI's page. The manual only describes 4,800 W for pure resistive loads in Power Lifting Mode, not as a general surge rating |
| Power Lifting ModeA mode that runs some heating devices above the normal output rating. Only for devices that allow it. | Off by default. Lets it power pure resistive loads rated 2,400 to 4,800 W, such as kettles, blankets and hair dryers, while the actual output stays 2,400 W |
| USB-APorts for phones, tablets and small devices. | 2 ports, 15 W in total (5 V 3 A); BLUETTI's FAQ says 2 × 15 W, 30 W in total |
| USB-CPorts for laptops, phones and tablets. Power delivery up to 100 W can charge most laptops. | 1 port at 100 W (PD 3.0, QC 3.0) and 1 port at 140 W (PD 3.0, 28 V 5 A) |
| Car outletA 12 V socket like the one in a car, for car accessories. | 1 cigarette lighter port, 12 V 10 A (120 W maximum), and a 12 V 30 A port; the two are connected in parallel with 30 A in total |
| Wireless chargingA pad on the unit that charges a compatible phone without a cable. | No: not part of the maker's specification list |
| Charging | |
| AC chargingHow fast it charges from a wall socket. Higher means a shorter wait. | Up to 2,300 W (10 A) at 230 V in Turbo mode; Standard mode 1,200 W; Silent mode 800 W |
| Time to charge from the mainsHow long a full charge takes from a wall socket. | Standard 100% in 2.8 hours; Turbo 80% in 78 minutes for EU, AU and UK units; Silent 100% in 4.2 hours (manual, estimates). BLUETTI's page says Turbo gives 80% in 45 minutes and full in 70 minutes (BLUETTI Labs test), which does not match the manual |
| Solar inputHow much solar panel power it accepts. A higher figure fills the battery faster on a sunny day. | 1,200 W maximum through the XT60 input, 12-60 V DC, 22 A. AC and solar together up to 2,400 W in Turbo mode (1,500 W in Standard) |
| Solar charging timeHow long a full charge takes from solar panels, in the conditions the maker names. | 4.1 hours to 100% at 1,200 W |
| Car chargingCharging from a car's 12 V or 24 V socket while driving. Slow, but useful on the road. | 12/24 V through the cigarette lighter port with the car charging cable; the engine must be running. With BLUETTI's Charger 2 (sold separately) up to 1,200 W from the alternator and solar |
| Backup switchover (EPS)What happens when the grid fails. EPS means it takes over automatically. | UPS mode: 10 ms; UPS modes (Standard, Time Control and others) are set in the app |
| Pass-through chargingWhether it can power devices while it is itself being charged. | Yes: it can charge and power devices at the same time |
| Solar and off-grid | |
| Works with solar panelsWhether you can charge it from solar panels. Yes means a built-in solar input or a compatible solar setup; read the detail for the voltage and power limits. | Yes: XT60 solar input, 1,200 W maximum, 12-60 V DC, 22 A; third-party panels work with MC4 connectors. |
| Off-grid useWhether the maker describes it running with no grid connection at all, for example in a cabin, van or off-grid home. Backup only means it covers power cuts but needs the grid the rest of the time. | Yes: runs devices from its battery with no mains connection and recharges from solar or a car. |
| Housing and warranty | |
| Dimensions (L × W × D)Length, width and depth of the unit, so you can check that it fits the space it needs. | 366 × 305 × 297.5 mm. BLUETTI's page labels the order L × W × D, its manual L × W × H, so the height and depth are not certain |
| WeightMatters for lifting, wall mounting and moving it. | About 26.3 kg |
| Operating temperatureThe range it is rated to work in. Cold and heat can reduce performance. | Discharging -20 to 40 °C; charging 0 to 40 °C; storage -10 to 40 °C; humidity 10 to 90%; altitude up to 2,000 m |
| Noise levelFan noise while working. | Not stated |
| Protection ratingIP ratings show protection from dust and water. IP55 and IP65 are rated for outdoor-style exposure; check the installation guidance. | IP20 |
| ConnectivityHow you monitor and control it, usually through an app. | Wi-Fi (2.4 GHz) and Bluetooth (BLE 5.0) with the BLUETTI app |
| CertificationsSafety and grid standards the maker says the product meets. | Not stated |
| WarrantyThe period the maker covers. Read the terms: conditions and capacity guarantees differ. | 5 years |
How long will it run your devices?
Choose how many of each device you want to run at the same time. The wattages are typical figures, so check the label on your own devices.
| Device | Typical power | How many |
|---|---|---|
| 10 W | ||
| 10 W | ||
| 15 W | ||
| 60 W | ||
| 80 W | ||
| 80 W | ||
| 40 W | ||
| 1,000 W | ||
| 2,000 W | ||
| 1,000 W | ||
| W |
The estimate assumes 85% of the rated capacity is usable after conversion losses. BLUETTI does not state this figure, so we use a cautious assumption. Real running times vary with temperature, battery age and how each device draws power.
Compatible with
What BLUETTI says this product works with. Anything not listed here is not confirmed.
- Solar panels
- 12-60 V open-circuit voltage, 22 A, 1,200 W, MC4 connectors; do not mix different panel types.
- Alternator charging
- BLUETTI's Charger 2, sold separately, takes up to 1,200 W from a vehicle alternator and solar.
- App
- Wi-Fi and Bluetooth monitoring and control in the BLUETTI app, with schedules and ECO modes.
Rules where you live
A portable power station is not wired into your home, so it is simple to use almost anywhere. Connecting one to your home circuits to power the house is different, and the rules for that vary by country. See our country guides for the rules, incentives and prices where you live.
Strengths and things to check
Strengths
- 3,014.4 Wh in a 26.3 kg unit
- 2,400 W output, 4,800 W in Power Lifting Mode for resistive loads
- 6,000+ cycles and a 5-year warranty
- Up to 2,300 W mains charging in Turbo mode
- 10 ms UPS switchover
Worth checking before you buy
- No expansion battery listed, and only IP20 protection
- BLUETTI's page and manual disagree on Turbo charging time
- Maximum 1,200 W solar, less than larger units
- Noise and certifications are not stated
- Not a home battery: not for running a house on its own
Change log
We record changes to this page here, so you can see when figures such as the warranty were last updated.
- 13 November 2026
- Page published. Warranty at publication: 5 years (BLUETTI page). BLUETTI's page showed the Elite 300 as available.
Where this information comes from
We have not tested the Elite 300. Figures come from BLUETTI's Elite 300 product page (Tech Specs and FAQ) and the Elite 300 user manual, last checked on 13 November 2026. Where the two disagree we say so. A value that BLUETTI does not state is shown as not stated.
We do not show prices, because they change often and differ between sellers.
- Manufacturer BLUETTI Elite 300 user manual (EU, English and German)
- Manufacturer BLUETTI UK Elite 300 product page, Tech Specs and FAQ
Spotted an error?
Tell us through the contact form on our About Us page.
Common questions about BLUETTI Elite 300
What can the Elite 300 run?
BLUETTI rates it at 2,400 W continuous, so a kettle, microwave or power tool is within reach, though a 3,014.4 Wh battery empties quickly at that load. Power Lifting Mode extends this to resistive heating loads up to 4,800 W.
How fast does the Elite 300 charge from the mains?
That depends on the mode: Standard 100% in 2.8 hours, Silent 100% in 4.2 hours, and Turbo up to 2,300 W. For Turbo, BLUETTI's manual estimates 80% in 78 minutes while its page says 45 minutes.
Is the Elite 300 the same as a home battery?
No. It is a portable power station that you plug devices into. An installed home battery is wired into your electrics by an electrician. See our guide to plug-in and installed home batteries.
Related guides
Need a home battery rather than a portable one?
Our calculator uses your own usage and tariff to estimate what a home battery could save, with conservative assumptions.